J1772 EV Charger Holder - Remix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.04 – €6.16 net (excluding VAT)
For file: J1772-Perpendicular_0.2mm_PETG_MINI_5h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.60 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 5.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
EV charger wall mount
- Rating
- 4.846 / 5
- Likes
- 119
- Downloads
- 1,317
- Makes
- 17
- Views
- 4,819
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up against the wall to save space. Then I changed where I parked/charge my car, and found that the ‘flatness’ of the first model was no longer needed. Life's funny like that.
Same distance between the two mounting holes. So if you printed the first one and want to try out this model, you can use the same mount points.
If you print with the “wall” side of the model facing down, then you don't need supports (no angle greater than 45 degrees). I recommend PETG.
If you download the model, please do me a favor and hit the “LIKE” button too. Thanks!