Gita/Sportcross Roof Rail Replacement Mid Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gita/Sportcross Roof Rail Replacement Mid Cover, which seem to be unobtainable
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Gita/Sportcross Roof Rail Replacement Mid Cover, which seem to be unobtainable from Toyota.
It will need finish work to match it up to the metal parts as I've over sized it in a few areas
There is a slight curve on base of the front edge(photo 4), as the model flat and printed flat on the print bed you will need to sand it to match that curve.
Original is ABS so that what I've printed mine in, which wasn't fun to print so I have 2 versions, the model and the model with the 'wings" I added to make it easier to print in ABS.
The underside is going to look ugly as the ABS sagged with some of the overhangs
Prints well with 2.6A4 automatic support painting and organic supports, you can use 2.5 with Grid/Snug but its a lot to remove