1 / 2
(Micro) SD Card Holder Doubled Remix DO NOT DOWNLOAD THIS USE THE REMIX UNDER THIS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removed the SD cards slots for more Micro's. Also Hexagons because they the best-agons
- Rating
- 1 / 5
- Likes
- 25
- Downloads
- 225
- Makes
- 1
- Views
- 1,155
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Removed the SD cards slots for more Micro's. Also Hexagons because they the best-agons.
All credit to : Mateo Van Damme
Print instructions
- Holder: I recommend printing the holder in PLA at 0.15mm layer height. With PETG there was a little stranding on the overhangs but nothing that affects the functionality.
- Case: I tested the model with Prusament PETG and Prusament PLA but I suspect everything except solid steel (not flexible) and TPU (too flexible) will work. I used 0.2mm for the case but higher should work as well.
NOTE : Lid file not included but is still compatible