1 / 5
Remix-Update (no coats): Laser engraver Honeycomb board positioner and "fixation" - Sculpfun - for use WITHOUT LegCoats, DIfferent Board Sizes !!! — image 1
1 / 5

Remix-Update (no coats): Laser engraver Honeycomb board positioner and "fixation" - Sculpfun - for use WITHOUT LegCoats, DIfferent Board Sizes !!!

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a physical link between Sculpfun frame and honeycomb base plate - to use with original legs without printed Coat

Rating
5 / 5
Likes
30
Downloads
375
Makes
4
Views
2,053
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

2nd Update 2025 March

ATTENTION:

New Insights tell, that Sculpfun FRAMES also might differ.

==> Before Printing, please initially check size of LASER frame 

My calculations base on the FRAME Size of my Sculpfun Laser. Measurement from the INNER surfaces to INNER Surfaces of the legs ( They are mounted on the outer of the frame ) for mine are:
Laser X-Direction 510mm and Laser Y-Direction is 560 mm 

Different values I can adopt in my design. Just ASK!

 

UPDATE 2025 March

Added Positioners for a SCULPFUN 400 x 400 Board.

400x400 is printed scale on frame. Board in fact is 447 x 447 mm.

Laser Zero Pos for this board is assumed X: 70mm , Y: 50 mm from INNER Surface of Metal Legs ( Remeber: No Leg Coats here )

===> I can adopt Board size, and Laser Zero Pos on request.

 

UPDATE 2024 January
Attention:

There seems to be, that Sculpfun sells HoneyComb Boards that formally do have the same size, BUT IN FACT THEY ARE A FEW MM SMALLER THAN MINE.
Mine is exactly 405 ( X-Axis ) by 405 ( Y-Axis ) mm and flagged as original Sculpfun product.

Distancers for a 401 x 401 mm size board are in Test.
Let me know, if you also experience a different size - so we find a way out.
OK?

* -------------------------- *

Please refer to the original model, but find some hints and explanations here already:

As the original provider, provided, legs are fairly small, and I wanted to make sure, that the positioner for the honeycomb board is very precisely aligned to the legs, I created kind of a coat to slide over the original legs and provide a broader wall to lean the position against.

For those, who do you want or need-for whatever reason-to supply this against the original legs. Only, I provided this model here.

The difference is fairly simple:
I removed some material at the ground as the coats for the legs do have a ground.
I added some material where the positioner would touch, the legs, and the thickness of the added material is the same thickness which the codes (see original model) would provide.

As the link between the positioner and the leg of the frame is much weaker than in my original model, I would recommend to use the screw holes to fix the positioner. 

Have fun and let me know if anything is wrong, needs improvement or simple questions.