Flat vacuum nozzle for 35 mm hose, 2 variants, variable length (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat vacuum nozzle for 35 mm hose, 2 variants (FreeCAD)
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 196
- Makes
- 3
- Views
- 1,001
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flat nozzle (only 11 mm high) to vacuum under spots you can't reach normally. Fits on any standard 35 mm hose.
There are two versions of this nozzle: the simple one is in one part.

The second version has multiple parts that can be stuck together so you can create a nozzle as long as you wish. You need at least the front and rear section but you can add as many middle sections as you like. I chose not to glue the parts together and took some sticky tape instead. In case something breaks I need to replace the broken section only.

You can create nozzles / parts of different length by altering just one value in dim spreadsheet in FreeCAD.

You can alter other dimensions, too but this will most certainly result in the need to re-model chamfers & fillets.
Printing
Printed in PETG, 0.4 mm nozzle, 0.25 mm layer height, 2 perimeters, no support but brim, arachne.

The flat section is intended to be printed with perimeters (walls) only, no infill. I chose random seams for maximum strength.

First Prototype
This last photo shows my first prototype, a simple one part flat nozzle. The tip was too weak and broke. This flaw is fixed in both current designs.

~ end ~