M6 Nut Wing Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.39 – €0.48 net (excluding VAT)
For file: wing_nut_M6_v1_0.2mm_PLA_MINI_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.44 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Finger wrench in a wing nut style to allow you to unscrew M6 nuts by hand.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 129
- Makes
- 4
- Views
- 601
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I made this as a finger wrench / wing nut tool to help me remove/apply an M6 locking nut on a long threaded bolt. This little tool allows you to get enough torque with just your fingers for screwing a locking nut in places it might be hard to get a regular wrench, or where the threads are too deep for a traditional socket set. Just slide this "wing wrench" over your nut, and pull it back out when you've screwed your heart out.
The bottom features a perfect cavity for an M6 nut, and the top features a hole that an M6 bolt/thread fits through.
This is not a wing nut, because it doesn't have threads or a nut; but you could make it into a wing nut by gluing an M6 nut inside it.
I suggest using lots of perimeters and 100% infill (or 100% infill via perimeters) for the most strength. (See images of the 4 perimeters I used. Worked well.)