1 / 2
Magnetic ventilation grid filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple addon for a 135x160mm ventilation grid
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
My old house has a ventilation grid near the kitchen table, and it's “conveniently” on the wall facing a street, so that a combination of smog and air pass trough.
I designed a simple grid that attaches with magnets and houses a carbon filter.
It requires four 10x2mm thick magnets, that will be glued in position, and a standard carbon filter (that will be cut to fit the grid).
I'll attach the STEP file so that you can easily modify it for your needs!
I printed on my Ender 3 V2 with a 0.4 nozzle and a 0.28mm layer profile, with supports enabled.