1 / 2
1.5" Triclamp extention, 70mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pipe part is Ø40mm
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print without support is Ok. Print with HTPLA if you need extra heat resistance or ABS. Mine was made with HTPLA and cured @ 110 C. I havent tested it with steam inside yet.