GPU Stand /w WS2812 ability
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
easy to print LED stand for your GPU that plugs into your 5v Aura Sync
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 782
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
New version is larger then the Picture version which was the original prototype I created!
Print in whatever material you want I used PETG-CF for the body and then a clear PETG for the remainder of the lighting pieces. You'll need a WS2812 LED strip that's 5v and a Header pin for your motherboard that's also a 5v.
136mm tall to accommodate most GPU cards and cases with adjustment's every 2mm
be sure to verify the cables to the connector and that the Date is facing the right direction.
Materials:
x1 WS2812 LED strip 6-8"
x1 2812 LED connector and wire/Header pins
x1 M3 x25 or 30mm bolt
x2 M3 nuts
x3 6x3 Magnets
*** Commercial Use and Step files available on my Patreon
**Use with caution as you can damage your board if you dont do this correctly so consult the boards manual prior to installation