Eurorack Faceplate for Akso Synth Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to be as slim as possible at 2HP wide.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 1
- Views
- 568
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED 29/04/2021: With Corrected hole spacing and a variant with an extra jack for people DIYing stuff
Designed to be as slim as possible at 2HP wide. The rear of the panel has a number of ribs to provide additional rigidity to the panel and on the edges standoffs to screw the Akso to the panel to better support the USB C connectors.
More info about the supported board can be found here https://zrna.org/akso
Print instructions
Single Part Print at 0.2mm in default orientation no supports required. Akso Screws in with 2 M2 bolts and nuts once again try to get a low profile head or it might protrude too much.