1 / 1
Din rail stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just another DIN rail stand
- Rating
- 4.667 / 5
- Likes
- 85
- Downloads
- 521
- Makes
- 3
- Views
- 3,496
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need to print two pieces and supply with DIN rail, bolts and nuts.
Multiple positions to mount the rail on the front and one mounting point behind.
Two versions of the stand
- “Din rail stand” Holes are design for M6 bolts and nuts. I have not tested but it should be possible to use smaller bolts and nuts.
- “Din rail stand – tap” With holes where you need to tap for 5mm threads.
In my setup I have 24V power, 24v fuses, terminal blocks and an ethernet switch on the rail behind.
The front rail is use to mount different equipment, typical PLC and IO.