Spinner Toy with pull rod / zipper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My design of a spinning toy with a geared puller.
- Rating
- 5 / 5
- Likes
- 90
- Downloads
- 403
- Makes
- 2
- Views
- 2,600
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My design of a spinning toy with a geared puller.
Step and STL file for "Spinner Body" thread is provided if you want to make your own version :)
Print instructions
Category: Mechanical Toys Summary
My design of a spinning toy with a geared puller.
Step file for "Spinner Body" is provided if you want to make your own version :-)
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.15
Filament: Prusament PETG
Notes:
I used Prusament PETG, but PLA would work fine also. I recommend 100% infill on the "Threaded Gear" and "Pull Gear". I used 80% on the "Spinner Body" to give it some mass, and 20% infill on the "housing". Layer height I used is 0.15 for threaded parts, and 0.2 for other parts. No supports needed, look at pictures for print orientation. I recommend using a brim for the "Threaded Gear" for better adhesion to print bed.