1 / 3
Robo3d Spool holder with bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had to print at PLA, 25% infill. Carbon tube 8mm lightly sanding with sandpaper The bearings I sized them too. http:
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I had to print at PLA, 25% infill.
Carbon tube 8mm lightly sanding with sandpaper
The bearings I sized them too. http: