Collapsing Zangetsu with removable blade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A collapsible Zangetsu that has a removable blade for printers that have issues with the original print-in-place model.
- Rating
- 0 / 5
- Likes
- 89
- Downloads
- 813
- Makes
- 1
- Views
- 3,871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a collapsable Zangetsu that is designed so that printers with low dimensional accuracy and stringing issues can print. The blade segments are designed to be printed in vase mode EXCEPT for the tip of the blade.
The original vase mode model is designed to be printed at 100% scale with a 0.9 mm line width in vase mode for the blade segments.
I would recommend a lower infill for the tip of the blade so that it isn't heavy. I also recommend doing vase mode test prints to see what your printer is capable of. This model fixes an issue with the Zangetsu hand guard not actually being attached to the hilt.