Mountable sheath for Eibos 3D Filament Vacuum Pump EURUS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mountable sheath/holder for the Eibos 3D Filament Vacuum Pump EURUS.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 1
- Views
- 320
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed someplace to store the pump (link: https://shop.eibos3d.com/products/eibos-3d-filament-pump) since it's round and likes to roll off my counter. The tool chest I have my printer on has threaded inserts for a handle that I'm not using right above a built-in power strip, so I designed this with a hole sized for one of those bolts. Works like a champ.
I included two STLs: one with a thicker back pad and a through hole for the bolt. Pretty sure it's an imperial bolt, but the hole is designed to be 6mm wide with a 10.5mm x 4.1mm recess for a button head. There's also a recess on the mounting side since the threaded inserts aren't flat to the side of the chest (as seen in the cover photo. The other STL is a thinner, solid back. I'm sure you could use some double-sided tape or just drill through for your own bolt. I also included a .step file for those enterprising individuals to create their own mounting solution (hex grid? pegboard? you do you, boo).
Printed in PLA, 0.2mm, 20% infill (not that there's really any infill). I printed mount-face-down with supports.