VU meter enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for the VU meter I built.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 171
- Makes
- 1
- Views
- 968
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made a DIY VU meter and published a video about it.
You can check the video for detailed instructions;
https://youtu.be/1Iul7NW0BFQ
Except for the components I mentioned in the video, you will need some M3x12mm and M3x8mm bolts. A few M3 nuts and 5x5mm m3 inserts. If you end up printing it, please post some pictures. I would like to see more people building my project :)
The bolts and nuts can be easily found on aliexpress if you have trouble finding the arts locally. I printed the whole thing in PLA on my Prusa mk3s. The sleeve was printed in TPU filament. Don't put the sleeve over the case until you finished everything because it is very hard to take off.