19" rack mount for EdgeRouter X SFP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 19" rack mount for the SFP version of Ubiquitis EdgeRouter X
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 305
- Makes
- 0
- Views
- 2,240
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a very simple rack mount for Ubiquiti EdgeRouter X SFP as well as its power brick.
I did not want to deal with too much tolerances so I designed it around cable ties, which is functional but a bit crude. You will also need two M5 bolts (at least 10mm) and nuts to fix the two sides.
If you wish to mount the router on the right-hand side you can mirror the parts in your slicer.
I am not happy with all details of it. Here are a few issues:
*The power brick should ideally sit a bit lower.
*The reinforcing walls restrict airflow in the router.
*The router is sitting at a slight angle after tightening the cable ties.
*Some of the cable ties could have a better fit.
*The cable ties bend the plastic a lot.
It is however entirely functional and having limited time I think good enough is good enough in this case.
I have included a Fusion 360 file if you wish to make any modifications or fix any of the above issues. Please upload a remix if you do.