Alchitry FPGA guard
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.03 – €1.26 net (excluding VAT)
For file: alchitry-case-v2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.14 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Guards Alchitry FPGA and first layer daughter board. Uses four M2x12 screws and four M2 nuts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 30
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Guards Alchitry FPGA and first layer daughter board. Uses four M2x12 screws and four M2 nuts.
Print instructions
I used PETG but it would work well with PLA. M2 screws are needed to secure the FPGA and optional daughter boards.