M3 M4 M5 screw cutting jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wound up with a silly amount of 40mm M3 screws that I will almost certainly never need and I keep running out of…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 94
- Makes
- 2
- Views
- 1,043
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I wound up with a silly amount of 40mm M3 screws that I will almost certainly never need and I keep running out of 20mm and 16mm screws, so I designed this simple jig to cut the screws.
I've made versions for M3, M4 and M5 screws, and I've also designed versions for cutting if you'releft handed (they are marked with an "L" in the file names).
These hold the screw firmly and fit over the corner of a table or bench, so that the screw doesn't move while cutting with a hand saw and you don't have to clamp the screws with a vise that might damage the threads.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Notes:
I printed them in PLA and they seem to be robust enough for the job. 3 perimeters probably recommended.