Fishman Tripleplay pickup mount

EDIT: Rev #2 is up, the clips now attach via a dovetail joint. Print these on their side for best results. The mount itself prints without supports without any issue and assuming your printer is dialed in moderately well the dovetails should slot together nice and easy.  

I bought a new guitar recently and wanted to add my Fishman Tripleplay pickup to it, but who wants to stick things to their shiny new guitar's paintwork? This easy, fast print clips into the pickup screw holes on my Humbucker instead.  

Also included a separate .STL which are the clips on their own. These print in under 10 minutes and are easy enough to just glue on if you break them off the original part.  

Note this model was made to fit a 7-string guitar so my humbucker's a lot wider. I've included the .STEP file so if you want to try it you can modify it to your requirements. If you've got a 6-string you might want to mirror the model as I've wired my Tripleplay to mount upside-down so it works properly on the 7-string.