Toilet Flush Handle System with Angled Lever
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Repair a broken Kohler flush handle with angled lever.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 357
- Makes
- 2
- Views
- 1,637
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Repair a broken Kohler toilet flush handle system like this https://a.co/d/6Nci2Hg by 3d printing the handle, axle, and angled lever. Must reuse the original through flange. If no longer usable, you can 3d print the square sleeve from here.
Print internal parts in ABS or ASA for rigidity, water and chlorine resistance. Print in the orientation shown in the screenshots. The axle will require supports for the flat surfaces of the triangle keyed ends.
Friction fit should suffice but may require glue to hold the parts together.
*update: added STL's for axle with 8.8-mm and 8.9-mm triangular key side in case you have trouble fitting the 9.0-mm version into the 9.5-mm triangular hole.
*update 10-8-23: redesigned handle and lever to prevent them from getting stuck in the pressed position due to friction; reuploaded STLs.
*update 8-16-24: added left threaded mount and nut, both STL's.