1 / 2
Towel Clamp with Loop (using TULAS)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Example model equipped with TULAS* (see description)
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 83
- Makes
- 1
- Views
- 631
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
2nd example with the use of TULAS.
The flexible loop connection is made with a few cm's of TPU filament.
V2 is clamping better.
For more info on TULAS, how to connect the filament and how to use it with your own models:
TULAS: the universal hanging/strapping system
NOTE: As a TPU filament I tested with Ninjatek Ninjaflex which has a hardness of 85A. If you use TPU with a higher hardness (e.g. 95A) you cannot pull such tight knots and the chambers for the knots may be too small. It is then best to scale up this model by ± 15%.