1 / 1
Deutsche Reichsbahn / Deutsche Bundesbahn K06 Klappdeckelwagen "Wuppertal"/"Sachsen" - GEREMD - Gauge 1 (1:32) — image 1

Deutsche Reichsbahn / Deutsche Bundesbahn K06 Klappdeckelwagen "Wuppertal"/"Sachsen" - GEREMD - Gauge 1 (1:32)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Deutsche Reichsbahn / Deutsche Bundesbahn K06 Klappdeckelwagen "Wuppertal"/"Sachsen" - GEREMD - Gauge 1 (1:32)

Rating
5 / 5
Likes
22
Downloads
402
Makes
1
Views
1,325
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

After finalizing the simplest version, without brakes (https://www.printables.com/model/423881-deutsche-reichsbahn-deutsche-bundesbahn-k06-klappd), it took little effort to create this version with a “brakemen's shelter”.

All items that need to be glued together have holes for using 1.75 mm filament wire as dowel/allignment pin. Use CA-glue.

Glue the 2 roof sections together. Assemble and fix all the wall sections with glue. Now glue the assembled roof to the wall.

The floor/frame is attached to the walls with M2 screws. 

Use 1.5 mm brass wire as hinge pins for the covers and doors.  Bend 4 pieces of 1.5 mm brass wire and fit them in the doors to lock them to the floor

Mount the steps on a bend piece of 1.5 mm wire. Bend 1.0 mm brass wire in the shape of the handrails and glue them in the provided holes.

This model runs on standard Märklin or LGB wheel-sets. They roll smoothly in MR63ZZ bearings. Screw the 4 spring/suspension-parts to the frame with M2 screws after press-fitting the bearings.

 

Good luck creating more rolling stock.

Met vriendelijke groet, Rob