Better Xacto Blade Holder Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.77 – €0.94 net (excluding VAT)
For file: blade-cover_02mm_petg_mk3s_58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 57.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cover for the Xacto Blade Holder by Unicorn Hatmaker. I'd personally recommend using the other one I designed later.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 98
- Makes
- 0
- Views
- 940
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Being a character with a low roll on dexterity, I found a way I could contribute to Unicorn Hatmaker's fantastic blade holder and make a cover that's a wee bit easier to put on.
This cover is designed to fully enclose the top portion of the pointy bit and handle. It takes into account the fastener with some added clearance. It also has a slight lip that should help retain it. The overall fit is intentionally loose.
There's even a little grippy portion on the top that helps a bit with grip, but also reminds you which end you ought to grasp with your fingers.
With any luck this will help you (and me) reduce the number of times being stabbed if only just a little.
Print instructions
This prints pretty well without supports. I personally used clear PETG because I really like how hard it is to photograph.