Xbox One Controller Stand for Brooks Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.97 – €1.19 net (excluding VAT)
For file: usb hub.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.08 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Function and beauty on your desktop...
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I designed this Xbox one controller holder as a daily user with a swappable USB hub to accommodate a regular micro USB cable for convenient charging, looks amazing and gets the job done. I'll update the different hubs I've been working on for different adapters and also for the controller alone.
Extra materials needed :
2 - M3 x 20mm Screws
2 - M3 Nuts
1 - MicroUSB cable
I printed it with a 0.40mm nozzle at medium resolution (0.20mm/50mm) with supports at 60 degrees just to have clean holes. both parts take about 7 1/2 hours and no post processing... just put the M3 nuts on, fit the USB hub with the cable and secure it with two 20mm long M3 screws...