RTX 3080ti Msi Ventus 3x shroud 120mm fan mod
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.39 – €9.04 net (excluding VAT)
For file: 3080tishroud_0.6n_0.3mm_PETG_MK3S_6h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.22 excluding VAT (range midpoint).
- Weight reported by the author
- 157 g
- Print time reported by the author
- 6.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mod will allow you to mount two 120mm fan on your Msi RTX 3080ti Ventus 3x.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 201
- Makes
- 1
- Views
- 2,493
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Tired of the noise and heat your RTX 3080ti Msi Ventus 3x is making?
I designed this custom shroud to let you mount two 120mm fan directly on your gpu rad.
I recommend you to undervolt your gpu with this mod to benefit of low noise level and lower your power draw.
For maximum performance i used Noctua NF-A12x25 Pwm Chromax fans
Print settings:
PETG - 0.6 nozzle - 0.3 layer height - 3 perimeters - 10% infill honeycomb
You will need:
120mm fan X2
Fan screw X8
Zip ties X6
Mini PWM to PWM fan cable X2
Left Shroud X1
Right Shroud X1
Clip X4