1 / 30
Laser engraver Rotary Roller and other purpose Height Adjustment Set - Sculpfun S30 ( S10 ?, S9 ? ) — image 1
1 / 30

Laser engraver Rotary Roller and other purpose Height Adjustment Set - Sculpfun S30 ( S10 ?, S9 ? )

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

When applying Laser to high/thick stuff, the distance for the laser (=Height) might need to be increased. My set helps.

Rating
5 / 5
Likes
49
Downloads
473
Makes
0
Views
2,876
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

NOTE:
The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser.
For the coats pls refer to one of my other models!
( The parts that can be mounted without the coats can be found in a near future publication )!

NOTE:
The parts mounted to the sculpfun frame in the REAR ( higher y-values) can stay mounted when printing ( without my Honycomb-board positioner ) … the DO NOT interfer with the laser head movevments.
The front mount parts must be removed as the 0;0-Laser Origin conflicts by 1 mm.
BUT mounting and unmounting is easy and a 30 secs thing - other than applying tho original leg heightening.
All mountable parts can additionally be fixed with a pin lock ( remixed from a nut fixation from SteveJohnson ) but I only would for the rear parts when continually kept in place.

AMENDMENT:
I published another Model, where the part to be mounted at the sculpfun frame are adopted to be used at the original legs without the “leg-coats” referred to here and in my other publications.)

( For those using my honeycomb-board positioner - as of today the positioner and the height extension do conflict in the corners. I am thinking to change .. but not yet decided.)

Espacially different height adjustments are a very easy and changes on all 4 legs can be done on the fly in less than 1 minute - ref to pictures as well.

Did i miss anything to tell???
Happy to answer question and to amend information if required.

Makes and Likes appreciated !!!

 

Tags