Screws Holder With Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box is created so that you can insert big magnets while printing to hold screws while you work on any project.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
You can print this models without any support and with any material (I suggest using PETG since it will be more durable but still on a good price).
In the G-Code the part are sliced for PLA that also works fine.
During the print of the main body you can set the printer to stop at the right layer so that the big magnets can be added with some glue (see picture of the sliced model).
The small magnets can be added later and secured with superglue. Remember that the magnets on the lid need to be in the right direction to connect correctly with the ones on the main body.
Magnets:
8x 5x3mm Round magnets
6x 20x3mm Round magnets
extra: superglue or any good glue