1 / 2
Skadis Wall 4 Hook Gluing or Doublesided Tape Mount — image 1
1 / 2

Skadis Wall 4 Hook Gluing or Doublesided Tape Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Im sure this is a remix of a similar design but with a thicker base to accommodate the use of double sided tape.

Rating
0 / 5
Likes
17
Downloads
156
Makes
1
Views
613
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Im sure this is a remix of a similar design but with a thicker base to accommodate the use of double sided tape. I have downloaded other plates similar but the backing plate was too thin to accommodate the use of double sided tape. The hooks would break out of the thin plates and creating a thicker backing has solved the problem.  These work very well with 3M's VHB tape or even Alien Tape from Costco. If you are going to mount them with superglue I recommend a light sanding with 80-120 grit sandpaper and cleaning with rubbing alcohol for a good bond.

 

Since I could not find the original file I designed this one from the ground up although I am sure it is very similar to others posted.

Printed with Rep Rapper's florescent red PLA with the following settings:

Nozzle temp - 213*C

Bed Temp -60*C

Walls - min 5

Supports - Everywhere.

Tags