YATH Tube Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.15 – €1.40 net (excluding VAT)
For file: TubeKrok_0.6n_0.2mm_PETG_MK3S_1h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.27 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Yet another Tube Holder. Helping out in the fridge. You can download .f3d or .step file and start a remix from there.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 1
- Views
- 232
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Yet another Tube Holder v1 and v2.
The inspiration for the model is the tube holders found in the shops.
Of course you can download .f3d or step file and make your own remix in fusion360.
Easy to print, no need for support .
Using double sided tape, make sure both surfaces are clean before applying the tape.
I recomend mounting the Tube Holder on the Hinge side.
v2
Try to mount so that top part is pushed in slightly in the backside of the shelf above, this will help the tape to handle the weight of the tubes.