1 / 7
i3 MK2.5S extruder cable management
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement of the stock cable holder on MK2.5S
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 67
- Makes
- 1
- Views
- 500
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Remixed from the great design by @pilniczek, x-carriage by @Jan Chromec
On MK2.5S there's not enough place for the x-carriage to reach the endstop, so I had to modify the overall perfect design to fit the frame.
What you need
x-carriage with end stop block and modified x-carriage-back
for x-carriage and x-carriage back:
- the stock screws
- 1x M3x10 screw (DIN 912)
- 1x M3 square nut
for cable holder:
- 3x M3x10 screw (DIN 912)
- 3x M3 Hex nut (DIN 934)
Print instructions
Material: PETG
Perimeters: 2 or 3
Infill: 20%
Infill pattern: Rectilinear
Layer height: 0,20 mm
The cable holder is better to print with enforced supports on the bridges