1 / 14
Sovol SV06 Z wobble wings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modification to the sovol SV06 to reduce Z-wobble using wobble wings
- Rating
- 5 / 5
- Likes
- 83
- Downloads
- 268
- Makes
- 1
- Views
- 4,494
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a modification that tries to reduce Z-wobble by installing wobble wings on the lead screws of the SV06.
Materials needed:
- Printed parts: 2x upper wing, 2x lower wing, 2x locking nut
- Heated insert 2x4*M3
- 2xM3*10mm screw
- 68xNeodymium magnet 6*2 mm (gridfinity size)
- We are using a lot of magnets because they need to support the weight of the whole X-axis carriage
- 6x6.35mm ball bearings
- Thin CA glue
I printed this out of PETG, 30% infill.
I used supports on build plate on the top wing
The steps are explained in the pictures or you can look at the attached pdf.