Bally Stern PCB Standoff Tool
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.36 – €0.44 net (excluding VAT)
For file: Bally Pinball PCB Standoff Tool v1_0.2mm_PETG_MK3S_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple tool to help remove pinball boards from those pesky standoffs.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 65
- Makes
- 1
- Views
- 374
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Simple tool used to compress the plastic standoffs that hold Bally/Stern boards. I find it easier to use than needle nose pliers.
Just press the tool over the standoff to disengage it from the board and gently pull the board off with the tool.
Should work with any type of filament. I used PETG.