1 / 4
Magnetic Geocaching container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Like Mats E container, just with 8x3mm magnets
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 134
- Makes
- 2
- Views
- 846
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Geocaching container with PET-cork, like Mats E container, just with 8x3mm magnets instead of 12x3mm
Dimensions
outside: 30x30x85mm
inner diameter is 21.5mm x 82 mm
Non printed parts
1x PET-cork
3x Magnet 8x3mm
Print instructions
I printet it our of PETG with the 0,2mm quality setting (3 perimeter and 15% infill) an it tourned out perfect. In my case, no post-processing was required. Of course you can also give PLA a try but I thought PETG or ASA was the best because it will last longer outside.
Additional information
I used a bit of super glue to secure the magnets in the container.