Thumb Piano
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.60 – €0.74 net (excluding VAT)
For file: intermediate_part_v2_0.2mm_PLA_MINI_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple fully printable thumb piano (Kalimba ?) in 3 parts. Glue assembly.
- Rating
- 3.667 / 5
- Likes
- 470
- Downloads
- 1,001
- Makes
- 7
- Views
- 8,229
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
A simple fully printable thumb piano (Kalimba ?) in 3 parts. I set 3 perimeters and:
1) PLA+ with 100% infill for the pads.
2) PLA with 100% infill for the shell.
3) PLA with 10% infill for the intermediate part.
Just glue the parts together with cyano.
I am more or less satisfied of the obtained sound (after some iterations), however is far from the sound from ones in wood and with metal pads, do not forget that it is plastic.