RC CAR Differential #3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This new version is ... smaller; it is compatible with my RC CAR V2 but should be used in other (future) designs
- Rating
- 5 / 5
- Likes
- 191
- Downloads
- 1,613
- Makes
- 3
- Views
- 8,936
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This time it's a full redesign including the gears… And obviously in order to reduce the size, I had to make some compromises. So I no longer use ball bearings for the spider gears which are now directly on a tiny PLA axle.
As the spider gears rotate only when the car is turning this should work. I was a little worried because the power is transmitted trough this tiny axle (which locks the diff cup and the drive gears together when the car is going straight). But I didn't break it !
I have kept the same ball bearings for the diff cup axle (or main axle) and for the drive gears and for the pinion : 6700ZZ (15x10x4) (QTY 2) and MR-117 (11x7x3) (QTY 5)
Well this thing now looks the part (pun intended) !
Printing tips:
I retain my naming convention for parts:
XXXnn-kk-name
XXX = sub assembly
nn part number within this assembly
kk number of instances needed in one single instance of the sub assembly
The housing is printed floating in the air and I used variable layer height for all parts.
This helps to make the inside of the housing and gears more accurate and barely slows the print.
I'm providing adapters for my RCCAR V2. https://www.printables.com/model/281110-new-design-rc-car-v2-almost-fully-printed
I've replaced the rear differential with this new version and it works perfectly as the reduction is still 1:2…