1 / 6
Wing Chest Armor for Mini Lucky 13
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to print wings for my daughter's mini lucky but there wasn't a chest piece. So I made one!
- Rating
- 5 / 5
- Likes
- 255
- Downloads
- 949
- Makes
- 2
- Views
- 4,872
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
I printed this model scaled at 200% with a .2mm layer height. I also changed the wall order to print the outside walls first. If you use 100% then use .15mm-.16mm layer height with the same wall order.
Infill= 15%
Wall/perimeter count= 3
I love it! Make sure you have decent bridge settings because you will need to print with the wing ball joints on the bed and the chest piece will have bridging higher up. I didn't have to sand any of the bridge sections for it to connect properly.