1 / 3
Roof Brace for Feral Cat Shelter — image 1
1 / 3

Roof Brace for Feral Cat Shelter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This brace allows me to remove the roof from our cat shelter for access & cleaning without damaging the roof.

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
182
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution

I bought this cat shelter for our outdoor cat:

https://www.amazon.com/ROCKEVER-Shelter-Outdoor-Rainproof-Three-Four/dp/B07S6PKN8R/?th=1

According to the assembly instructions, the roof is attached to the shelter with four screws, which means the only access to the interior is through the two entrances or, if the floors are removed, through the bottom. It's much more convenient to access the interior by removing the roof, but the ridge of the roof is rather flimsy, and taking the roof on and off will almost certainly break it eventually. I designed this brace to stiffen the roof and allow it to be removed to access the inside of the shelter without risking breakage. Note that there are alignment tabs on the roof which need to be positioned correctly when replacing the roof.

I printed this in ASA, which is UV stable and suitable for outdoor applications. The brace is secured to the roof with #6 1-5/8" stainless deck screws with bugle heads.

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Filament: Polymaker Polylite ASA White

Category: Pets

Tags