Newtonian telescope diagonal mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A diagonal holder for a reflecting telescope, designed for a diagonal of 35mm or larger.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 95
- Makes
- 0
- Views
- 871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
A diagonal holder for a reflecting telescope, designed for a diagonal of 35mm or larger.
Revision:
Increased clearance on bolt holes to match ISO standard for close clearance
Increased clearance on nut recesses
Added nut recesses in top piece for M4 nuts
Print Settings
Printer Brand:
ANET
Printer:
ANET A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50% or more
Notes:
The prototype in the photo is made from ABS and assembled with the following hardware:
1 - M6 X 50mm hex head bolt (central shaft)
3 - M6 washers
2 - M6 hex nuts
1 - M6 wing nut
3 - M4 X 35mm pan head screws (mirror adjustment)
3 - M4 X 8mm pan head screws (vane attachments)
12 - M4 washers
6 - M4 hex nuts
3 - hotbed leveling compression springs, available here:
https://www.amazon.com/Ocr-Compression-Printer-Extruder-Accessories/dp/B01HO33RBY/
For the vanes I recommend brass strips available from most hobby stores.
Category: Physics & Astronomy