SUNLU FilaDryer S1 Drybox Hygrometer Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For my SUNLU filament drybox (S1) I created a holder so I could add a Hygrometer and tempsensor inside the box.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 83
- Makes
- 1
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I was inspired by Daniel Stahovic's video on YouTube
https://www.youtube.com/watch?v=6FG4O5l9XpE&t=8s
For my SUNLU filament drybox (S1) I created a holder so I could add a Hygrometer and tempsensor inside the box.
The filament is still able to rotate freely and so it is possible to heat and dry your filament while you are printing right from the drybox.
Just unscrew the two screws from the heatplate 2mm and the holder slides on.
The meter is inserted ascew and turned straight as soon as it is in the holder to lock it.
I used these meters from Amazon, but you can also find them on Chinese websites, the're kinda standard I guess.
Print Settings
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2-0.3
Infill:
20-25% grid
Filament brand:
eSUN
Filament material:
PETG
Notes:
Put the print flat on the printbed to print without supports (if you have a side cam on your printer the print looks like a small galdiator arena ;) )