Prusa Mini Cubic Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa Mini 50x50x50 Acrylic Enclosure with fully magnetic door
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 76
- Makes
- 0
- Views
- 1,545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an enclosure I made for my Prusa Mini+. It's a 50x50x50 cube. Top part is not fixed to the base, so you can remove it when you need an easy access to the printer. Frontal door is fully keep in place by magnets, embedded in profiles.
Cube faces are made using 3x 1000mmx500mmx5mm acrylic sheets. Each sheet has been cut in 2x 500mmx500mm half sheet. You'll have to drill 16x holes in each sheet (excluded bottom) to fix corners and borders using screws and bolts. You'll need also to cut a hole in a single face, to let exit cables from enclosure.
Borders and corners are released in PETG (1,2kg, around 400m).
You'll need 5x16=80 M3x12mm screws and M3 bolts. I used hex headed black ones (DIN912 Grade12.9 Alloy Steel M3*12 and DIN934 Black Carbon Steel M3), to better fit with black PETG.
You'll need 26 neodymium magnets (8mmx3mm), and some glue (on top of magnets, so PETG can stick during print).
You can optionally add a temperature/humidity sensor to the door or to the roof. I used following one:
https://www.amazon.it/dp/B07QH1MYPY?ref=ppx_yo2ov_dt_b_product_details&th=1
Inside cube there is enaugh space for printer, 1x marsgizmo box and AlveoONE-R filtering system:
You can optionally add a LED strip all along the internal side of the roof. I used natural white 24V LEDs, to use same power supply for both LEDS and filtering system.
https://www.printables.com/it/model/446468-led-strip-mount-for-prusa-mini-cubic-enclosure
You can optionally add one or more plate holders along base border:
https://www.printables.com/it/model/448837-plate-holder-for-prusa-mini-cubic-enclosure
You'll need to print:
2x Corner_A
2x Corner_B
1x Corner_C (1x magnet embedded inside)
1x Corner_D (1x magnet embedded inside)
2x Corner E (2x magnets embedded inside)
1x Corner_F (1x magnet embedded inside)
1x Corner_G (1x magnet embedded inside)
2x Corner_H (2x magnets embedded inside)
8x Border_A
1x Border_B (It needs an hole in acrylic sheet to let exit cables)
15x Border_C
9x Border_D (9x magnets embedded inside)
3x Border_E (no magnets on the bottom side)
9x Border_F (9x magnets embedded inside)
Enjoy! g.