Bambu Lab X1 rear spool spacer and PTFE routing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Give more space to the rear-mounted spool retention arm and route the PTFE tubing from your AMS
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 220
- Makes
- 3
- Views
- 1,283
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
I wanted a spacer between the spool holder and printer for my Bambu Lab X1 Carbon as their stock configuration makes things a bit tight. I found a model for that but also noticed a model for routing the PTFE tube from the AMS hub. I figured “Why not have both?” so I combined them in Tinkercad and tweaked it a bit to make the screw holds a little wider and make it print WITHOUT supports!
I used 2 28mm M3 screws to attach it and this worked well keeping it all tightly together. The screws go in just a little snugly, but I was able to insert them through by hand. You can absolutely mount it fresh off the printbed, but I actually used a small hand drill to bore out the mounting holes just a little so that the screws dropped right through. I decided to do this because getting it to mount perfectly with the tighter holes was proving a challenge and I wanted to make things easier, but this is optional.
I printed in PLA in .2mm Strength mode. I considered a stronger filament, but I decided that holding a max of 1kg of filament probably didn't require more strength. If this proves to be a mistake at some point and I decide to print in something stronger, I'll update this description, but I don't think it will be an issue.