1 / 1
SUNLU FilaDryer S1 Mount for 2020 Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Requires a pair of M3 screws to assemble. (Use at least 16mm length, but longer lengths should be fine.)
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 253
- Makes
- 2
- Views
- 2,419
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Requires a pair of M3 screws to assemble. (Use at least 16mm length, but longer lengths should be fine.) A single M4 or M5 screw + T slot nut can be used to hold it to the extrusion, but this probably isn't necessary if you don't expect your printer to get bumped or otherwise moved much.
Print instructions
Supports aren't needed depending on print orientation, but note that ideal orientation is different for both the front and rear sections.