1 / 3
Gearblank for Gearmilling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
37 Teeth, Module 1.25
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple to make and very cheap gearblank for cutting test spurgears on the mill. - For checking the correct setup of the dividing head.
This is much cheaper and faster than machining them conventional.
This is an example for an 37 teeth gear for a 15mm shaft with module 1.25.
PetG would be a better material. PLA needs a lot of cleaning the fuzz from the testgear.
Printed with 100% infill!