1 / 1
Steampunk bookends - customisable dynamic gearset!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cool steampunk inspired bookends that double as fidget toys! Print your own selection of gears to make it yours!
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 213
- Makes
- 2
- Views
- 1,209
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- GNU General Public License v3.0
Sorry for the garish transparent red PETG example print! It's all I had left haha.
There are a selection of 30mm diameter gears and 50mm diameter gears for you to mix and match. I highly encourage you remix and try new designs using the .stp files I included.
File guide:
- Print either base_static.stl or base_dynamic.stl
- If you printed base_dynamic.stl, print gear_skeleton.stl
- Print one each of any design of 30mm gears and 50mm gears
- Print gear_tester.stl and plug your two gears in. Test to see if the gears mesh to your liking - if they don't, you might have to tune your printer
- Print 2 other 30mm gears and 2 other 50mm gears
- Assemble base_dynamic.stl together with gear_skeleton.stl using a bit of superglue
- Pop the gears onto gear_skeleton.stl
- Print the mirror versions for the other side of the books
- Enjoy!
Print settings:
- 20% infill
- 3 perimeters
- Print base_x.stl with the static gears on the bed
- Print the rest with the flat side on the bed