1 / 2
V-minion case + external UHP psu + Pi 4b+
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back panel for the RatRig V-minion electronics case when using the UHP-350-24 external psu mount and a Raspberry Pi 4
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this model if you have a Mean Well UHP-350-24 psu and you're mounting it externally – e.g. with JP3d's mod.
This is the stock back panel for the electronics case, but with cutouts for the Raspberry Pi 4b+ instead of the Pi 3a the original comes with.
As the Pi 4 has additional USB ports, I also added a window for easy access. Added extra vent holes too.
Added a clearance offset of 0.25 to the pi cutouts.
Suggested to print in PETG for flexibility.