BTT PITFT50 Pi Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a rpi on the back of the btt pitft50 on my voron 2.4, while being able to plug in usb cables
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I installed a btt pitft50 onto my voron v2 using alanho's mount and wanted to free up some space in my electronics bay by mounting the pi on the rear of the screen. This mount raises the pi allowing it to clear the screens mount and offsets it higher to allow usb cables to be plugged in through the side (messy but free) or use a ribbon type usb cable which will be within the skirting for the screen .
Print Settings
I used standard voron print settings
BOM
4x m2.5x10mm SHCS to install on screen
4x m2x10 self tapping screws
optional
Ribbon type usb cable, I used these
s2-t2 length to suit your printer
S2A-S4B (will be uploading a holder one day)
This is the screen mount I used
https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/alanho/BTT_PITFT50_v2_Mount