8 inch Recirculating Sluice Blank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an 8-inch recirculating sluice black that I use for mat testing, if you like finding gold this may help.
- Rating
- 3 / 5
- Likes
- 26
- Downloads
- 209
- Makes
- 1
- Views
- 1,721
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model I made to test out different 8-inch sluice mats in a controlled setting, the header box has a ¾ inch hole in it to fit aquarium tubing from an aquarium pump.
I printed the model as the cut-up file shows and used a 0.35mm starting layer with 0.48mm after that. I used PLA to print this model and I only supported it from the bed and the supports were minimal. This file was cut to fit on a Prusa i3 Mk2.
I have included a flare for this sluice as well that can be put in place instead of the header box.
I used a 3d pen to attach the parts together with scrap PLA filament. If your looking for a good 3d pen to put prints together with, I use the SCRIB3D Advanced at this link https://amzn.to/40UYouT I have put together a ton of prints with it.