1 / 5
3/4'' outside thread to 16mm drip pipe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple adaptor to connect a 16mm drip line to a 3/4'' outside thread.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 96
- Makes
- 1
- Views
- 387
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I needed an adaptor to connect a 16mm drip line to a compact pressure reducer with a ¾'' outside thread.
Since all commercially and quickly available ones seemed to be for inside threads, I saw this as a chance to improve my modelling skills and threw this together myself.
I made two versions, the first was a bit too long for my application, since I did not want to add more than one rubber seal in it.
Print orientation depends on how you want to seal it:
- Print 16mm end downwards if you want to use a rubber washer. You'll need a very flat mating surface inside the thread then.
- Print thread end downwards if you like the better surface finish on the outside and want to use teflon tape for sealing anyways.