12mm/10mm finger wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.65 – €0.79 net (excluding VAT)
For file: nut_wrench_03mm_pla_mk3smmu2s_52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 51.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I've been building a modular synthisizer (with 3d printed panels) and need to quickly tighten a lot of jack sockets…
- Rating
- 4.833 / 5
- Likes
- 29
- Downloads
- 252
- Makes
- 5
- Views
- 1,125
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I've been building a modular synthisizer (with 3d printed panels) and need to quickly tighten a lot of jack sockets and potentiometer nuts. So I whipped up this little 10mm/12mm wrench that lets me do it.
2/10/2021 - Added a modified .stl with 12.5mm/8mm wrenches as the latest set of phono jacks I got came with slightly larger nuts and 8mm is useful for the nuts on small switches.
Print instructions
I printed it with the 12mm side down and supports. Would probably work without supports...but this helped it come out a bit cleaner. I just printed it on 0.3mm Draft on my Mk3s since I wanted it quick. Works great!
I've also printed these in Sirya Tech Blu on a MSLA printer and they've worked great. For SLA I put them at an angle and used supports - probably would have worked printed vertically but laying it over made for a much quicker print and still seemed to maintain dimensional accuracy.